Help with new system please!

[Rattlesnake]

I have just bought a AMD T/Birdv 1.333 and a Abit KT7A-Raid

First thing is what should the default mutl be should it be 10x133?

Also what sort of temps should i be getting temps are at 35-39 idle and 50 underload is this right?

and the last thing is on hardware monitor program am getting 3 temps which is weird and had this 24c,28c,35-39c all temps change any ideas please?

[AZZKICKER]

your settings is correct






now for temps
your temps aare ok but it sounnd like to me that you need better case cooling.......should bring your load temps down

also what heatsink and thermal interface materail you using?

[Rattlesnake]

Am using a Thermo Engine with the 5000rmp fan and from what i have read the thermo tape on the bottom of these little suckers are fine without themo paste.

[AZZKICKER]

case fans my brother

case fans

[Rattlesnake]

I have 4 case fans 80 summos running overclocked 2 at the bottom left side and 2 at the top.

also is this strange if i set the mult to anything other than 10 i get lockups in windows but if i set the bus speed to 140 it runs fine. I take it that my cpu is unlocked as the bios allows me to change both the mult and the voltage.

[silent bob]

from what i have read the thermo tape on the bottom of these little suckers are fine without themo paste.
from what I have heard these are crap . If I were you I would look into getting some Arctic Silver2 , this will drop those temps a couple-o-degrees .
just curios what the rest of the system looks like ? so ... what u got ?

[kat]

definitely get some AS 2 and lap that hs ;D thermal pads are very inefficient

[dozier768]

Rattlesnake (Jul 22, 2001 06:35 p.m.):
I have 4 case fans 80 summos running overclocked 2 at the bottom left side and 2 at the top.

also is this strange if i set the mult to anything other than 10 i get lockups in windows but if i set the bus speed to 140 it runs fine. I take it that my cpu is unlocked as the bios allows me to change both the mult and the voltage.

perhaps you need to up your core voltage

[Rattlesnake]

Right i'll get some AS 2 also is it worth puttin a Delta fan on my HS and soddin off the original fan