AMD Athlon T-bird 1400 (266) @ 1843MHz (320)

[AtomicGuY]

Has any body beat 1843MHz stable in Windows Me using standard Air Cooling? The Thermalright SK-6 is what I'm using but I got a modded 10k 80mm fan to cool it down.

[OC-Master]

You should wait till the Palomino Core comes out, sell your 1.4GHz cpu and then slap on the Palomino and crank that sucker up!

btw, my 3Dmark2001 score is "201" only because I'm using a 4MB RIVA128!!!

LOL, GeForce2, here I come.

[GuNRocK]

AtomicGuY thats an awsome o/c... is there anyway u can bump it up anymore?

My question is wahts your CPU temp at (C) idle and full load?

what are the codes on that cpu u got

[AtomicGuY]

29c min / 53c max with Prime95
Using SK-6 with modded 10k rpm 80mm fan. And lots of Artic Silver2
My motherboard temp stays at 24c.
My dorb3 gave me fairly ok results, 31c/56c. My bud taunted me to get the SK-6, I was interested in the Gladiator but was glad I ended up with the SK-6

1400C
AYHJA Y

[AtomicGuY]

Unfortuneatly, the KG7-RAID limits me to a 12X multiplier. I can boot with 12 x 133 (1600MHz) with no problem but the 12.5X multiplier isnt avail because its for the 200bus chips with higher multipliers. I was wondering what the 1400 (200bus) chips are like? I would like to try the 14X multiplier!!
When the Palomino core comes out, I will for sure get a 200bus version since I can just lower the multiplier if I dont like the lower fsb.

[jr]

Not to doubt your overclock but my Athlon Mp scores higher in 3dmark 2001 with my GF3 at 230/530 and so did my tb at 1550. Something is wrong with your setup you should be getting 7000 + scores on 3dmark 2001. I have yet to see any definitive proof of you running at these speeds. Why are the pictures so small? Show us some proof yet to see any yet. Here are my benches.

http://home.austin.rr.com/jr50457/

http://gamershq.madonion.com/compare2k1.shtml?1235928

[ManOfKnight]

i am not doubting his scores...i can see that it says 1.84GHz in BOTH screens......as for the 3dmark, it is not all processor for that, it is the card


Good O/C bra....r u n SETI?

[AtomicGuY]

not yet,

Yea, I've been having problems with my Video card, I've hit 6900 before with triple buffer on, but maybe its got something to do with my setup that I'm doing wrong?

[jr]

How the hell can you see that **** I set my resolution at 640 x 480 and it is still hard to read and blurry. I have serious doubts.

[AtomicGuY]

Bigger? if it fits..

[AtomicGuY]

Big enough now bro?

[jr]

Ok big enough nice CPU you should try installing direct x 8.1 and the 12.90 detonator drivers you should score much better in 3dmark 2001. You have a 1 in a million CPU there. I havent even seen anyone hit over 1.7G without extreme voltages and watercooling. Lets see the wcpuid and prime 95 torture test in the background like my screenies. Then I will believe it.

[AtomicGuY]

I still use 6.31 det, LOL, is 12.00+ really that fast??

I got Directx 8 installed

I'll download Prime again and run just for your sake!

[jr]

Hey man thanks you can understand why there is doubt. Yeah the 12.90 are much faster download them and direct x 8.1 and then bech it.

[AtomicGuY]

k, kool, says I gotta wait like an hour before the test finishes in Prime, so I'll post tomorrow.
gatta go now

[AtomicGuY]

OK, this is about the closest I got, I ran prime for like an hour or sometin and its runnin 100% with no lockups!

[AtomicGuY]

Rock stable with Prime95 at 100% processor load rated with the system monitor included with Windows Me.

[jr]

Ok I see no reason why you would lie. Now get those 3dmark2001 scores up. That is an awesome overclock.

[AtomicGuY]

here is basically the same picture exept from my usb camera

[Jetset]

10,000 rpm fan!!! How can you even hear your self think

[AtomicGuY]

it kinda get muffled by the other fans in da case
LOL

[AtomicGuY]

Holy @#k, 7225 3Dmarks. Thanx man. jezz, I thought the 12v series detnator drivers were chesse but now, wahha, sweet!

[OC-Master]

I have three words for you AtomicGuY,

"YOU DA MAN!"

[jr]

Publish the score and display the link no one has an amd over 1800 on the database. Yep the 12.90 drivers rock.

[jr]

YOOOOOOO. You going to publish the score and give a link to your 3dmark2001 score or not.

**Edited by forum moderator** Flames will not be tolerated.

[mojo]

Bah!! 1843 Mhz will be nothing in several months. When the Palimo comes out in the fall, it will oc to 2 gig easily. And it's enhanced cache and nForce chipset, suddenly your 1843 is like a 386. Muahhahahahaha.

[AtomicGuY]

then it will be time to upgrade to da Palamino processor

[AtomicGuY]

Bah!! how do I post the 3dmark settings? I dont have 3dmark registered

[mojo]

Good answer man. I was just damn jealous that's all.

[AtomicGuY]

You see, with AMD, its actually possible to replace your processor every 5 months unlike Intel where you got to save up your money for like 2 years to get something good going. The price is overkill
LOL
anyone with me on that?

[ReTiCuLeX]

Shall I sell my 2 CPUs I have 1.33Ghz 266fsb AXIA-Y and a 1.2Ghz AXIA-9 shall i sellem ? I wana get a palimano = ) but duno if its worth selling my 2 cpus i have everything for another machine except a videocard lmfao.