• Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!

P4P800 1012 Bios

Overclockers is supported by our readers. When you click a link to make a purchase, we may earn a commission. Learn More.
Bobby

Bobby

Member
​
Joined
May 28, 2003
Ok, I downloaded this but haven't had a chance to flash my mb until a couple of hrs ago. I like it. :D

I originally had 1008 and was able to do 260 fsb. Then I flashed to 1010 and lost 2mhz (258mhz). Both bios couldn't handle mem ratios that well. I couldn't even post with 3:2 (266) at any setting. With 1012, I can get into windows at 275 but not stable. Couldn't do that with 1008 or 1010. I'm at 260fsb completely stable again. 265 fsb was good but failed prime95 every once in a while but passed memtest86 (2 full passes). Since I'm folding, I wanted to stay on the safe side and I'm at 3.124ghz (260 fsb) completely stable.

Looks like they did something with the memory ratios though.

-Bobby
 
What did they do with the memory ratios? I think I am about ready to flash a new bios. I have been sitting on 1009 for like 3 months.
 
The memory ratios didn't work with certain types of memory layouts (ie. 32x64, 64x64, 32x8, etc). With my Twinmos PC3700, I couldn't do 3:2 (266). Wouldn't even post at any setting. I had some problems with 5:4 too but not as bad.

1008 was the best (general consensus) until 1012 came out. The jury is still out on 1012 but I like what I've seen so far.

-Bobby
 
That's strange cuz the ONLY change they made in 1012 is support for the P4 Extreme Edition. Anyways I'll give it a try this weekend to see if it gets me a few notches up. Right now I'm hitting a brick wall @251FSB...
 
That's what the text file and rumors say but I found that the dividers are much better with 1012 than it was with 1009 and 1010. Even better than 1008.

-Bobby
 
I have my 2.6c on with the 1012 bios. I am running 255 1:1 fsb for 3312. I am running prime right now with no hiccups. Also mind you this is with THE RETAIL HEATSINIK AND FAN!! Not to shabby if you ask me. The memory I am using is 512 of Corsair XMS 4000 500 mhz rated stuff. My vcore is at 1.625 and temps are 29c under no load and 49-51 under 2 prime instances. Not too shabby of a chip I may say.
 
jarablue said:
I have my 2.6c on with the 1012 bios. I am running 255 1:1 fsb for 3312. I am running prime right now with no hiccups. Also mind you this is with THE RETAIL HEATSINIK AND FAN!! Not to shabby if you ask me. The memory I am using is 512 of Corsair XMS 4000 500 mhz rated stuff. My vcore is at 1.625 and temps are 29c under no load and 49-51 under 2 prime instances. Not too shabby of a chip I may say.
Click to expand...

Yeah, you gotta like that!
 
Yea Grandpa I'll have to say that the Kingston Hyper X PC4000 Ram stinks! I had better luck with my GeIL Value RAM PC3200. I just flashed 1012 today hoping to solve my lil Ram Issue and no such luck.

Hyper X PC4000 2 x 512 245 1:1 wont do 285 5:4 like me GeIL did.

Need Ram Advice.
 
Is that the Mushkin PC3500 lvlII? and the 303 is 1:1 or 5:4 ?

Thats Hott:mad:

Now looking at your specs I have the exact setup.

Asus P4P800 Deluxe
2.4c MO
1GB Kingston Hyper X PC4000
Sapphire 9500 Non-Pro Softmoded
 
You must log in or register to reply here.

Similar threads

M
192gb ddr5 am5 7950x asrock x670e taichi gskill 6400 cl32 - max 4800 old bios, max 4000-4200 new bios, not even 5200
Replies
13
Views
1K
meltmanbob
M
Dorito Bandit
ASUS B650E-F Motherboard BIOS
Replies
3
Views
2K
Dorito Bandit
Dorito Bandit
U
  • Locked
Ryzen 9 5950x on Asus tuf x570 plus, SOC voltage on Auto vs manual?
Replies
6
Views
957
EarthDog
EarthDog
P
BIOS configuration with i5-13600kf
Replies
0
Views
814
przemek1109
P
M
Small voltage difference between two RAM modules from the same kit.
Replies
3
Views
170
Woomack
W
Back