NEED MEMORY for my SL6Z3 + PROMMY, pls help!!!

[Jojo1971]

i want to get more out of my 2.4c @ 3.6 so i decided to get a prommy mach 1. im aiming for at least 3.744 GHz..

now here's my problem..should i get the XMS 4000 and run 5:4 ratio ... at 3.744 GHZ=12x 312 fsb, i will run the xms 4000 at DDR 499 BUT with loose timings of 3-4-4-8


or

get the XMS 3500 and run 3:2 ratio... at 3.744 GHZ=12x 312 fsb, i will run the xms 3500 at DDR 416 with tight timings of 2-3-3-7..


i know i can mod the vdimm but isnt DDR 499 too high for the 3500 at 5:4 ratio..


Experts, GURUS, pls. help me so i can pull the trigger on ordering a pair of 512mb's by Sunday night..

[Speed_Mechanic2]

Your gonna need a VDIMM mod either way. You could try to put ~3.25V into Winbond BH-5 memory and hope it gets up there for 5:4, or try Hynix D43 "B" with ~3V and try 3-3-3 timings. Running 3-3-3 timings with 5:4 should net you better performance then running 3:2 with 2-2-2 timings.

[itizme]

Originally posted by Speed_Mechanic2
or try Hynix D43 "B" with ~3V and try 3-3-3 timings. Running 3-3-3 timings with 5:4 should net you better performance then running 3:2 with 2-2-2 timings.

3448 timing work for me at 500 with the d43's

[Jojo1971]

i just ordered 2 sticks of xms 3500 v 1.1 (BH-5)..will post results next week.. thx guys..

[itizme]

let us know!!

[Subaru]

I would've help everyone out, but the thing is my mach2 is in the closet and i've been trying to hide it from my girlfriend. Waiting for her to approve that I can buy it and then I'll take it out to play. Been trying to buy her gifts and stuff because her birthday is coming up. Hopefully, I can make her happy and she'll approve. Hhehehe By then, I'll post alot of bench.

[flapperhead]

the adata vitesta pc4000 seems to like hi voltage and some of the sticks will run over 300 1-1 I have 1 stick of hyperram built for komusa with the adata chips and the that sucker runs 295 at under 2.8v!