• Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!

P4P800 3.0ghz @ 3.4ghz Hit My Limit?

Overclockers is supported by our readers. When you click a link to make a purchase, we may earn a commission. Learn More.

NiceGuy4

Registered
Joined
Nov 24, 2003
Location
Newbury Park, Cali
System
P4P800 Deluxe with latest drivers
P4 3.0ghz
Cosair XMS 2x512 PC3200

Bios
3.0 ghz overlocked to 3.4ghz @ FSB 228 can not get it stable
tryed vcore on auto & 1.5v & 1.65v & 1.7
DRR MHz & timings tryed auto &
1:1 @ 2-3-3-4 & 3-7-7-7-8
5:4 @ 2-3-3-4 & 3-7-7-7-8
3:2 @ 2-3-3-4 & 3-7-7-7-8

AGP/PCI currently locked
DRR Voltage tryed auto & 2.85v
AGP Voltage current 1.7 tryed 1.5 & 1.8

After everytime i change anything doing with memory i run memtest and no errors are found. I run prime95 and my workload temp is around 44C. Normaly my computer will restart but sometimes my mouse will freeze. I've tryed everything. Please help me out. Suggestions.
 
I'm using a p2.6 with ONE stick of corsair xms 512mb and a p4p800. I'm not testing with prime95 yet; I've been using pcmark2002 and have had stable at:
fsb 262mhz
DDR320 at 2.65v
cpu 1.6v

I remember someone writing that they were getting higher fsb with only 1 stick of ram - worth a shot?
 
Prok said:
I'm using a p2.6 with ONE stick of corsair xms 512mb and a p4p800. I'm not testing with prime95 yet; I've been using pcmark2002 and have had stable at:
fsb 262mhz
DDR320 at 2.65v
cpu 1.6v

I remember someone writing that they were getting higher fsb with only 1 stick of ram - worth a shot?

nope, still getting errors.
 
yeah, my 2.4c oc higher(maybe around 10 FSB) with just one stick installed. i think it's memory that is holding u back. i could only get to 3.0ghz with 2 sticks of corsair pc3200c2. but with even a ddr333 infeon chip, i can go all the way to 3.4ghz stable. i still cant figure out why. maybe a compatibility issue.
 
kev380 said:
yeah, my 2.4c oc higher(maybe around 10 FSB) with just one stick installed. i think it's memory that is holding u back. i could only get to 3.0ghz with 2 sticks of corsair pc3200c2. but with even a ddr333 infeon chip, i can go all the way to 3.4ghz stable. i still cant figure out why. maybe a compatibility issue.

dam, i thought the cosair xms pc3200 ddr 400 was really good ram.
 
Back