What celeron 2????

[BiLLaBonG]

which is a good chioce? which cely 2 overclocks the best
i want to be at 1ghz or very close, and which of the following should i choose to get close to that?
633 through the 700 or 733, which cely between those speed s would overclock the highest / stably and get me close to 1ghz? thx

[Tim-]

cc0 600 would be the highest you want to go- avoid the others or you will regret it. The 600 will go as high as any of them, and give you better bus performance, and many less headaches.

Keep in mind that the celermine core typically runs out around 900 or 950 on some. The ones that will go to 1GHz are VERY rare, even with pretty extreme cooling. The odds on just getting one at random are astronomical, so don't start out with a goal that is highly improbable.

If the GHz mark is important to you, a PIII or Duron is a better choice. At least the odds are better that they MIGHT make it...

[Teddy]

I've had good luck with my cele 566 it runs at 1006 at 1.90 fsb and it is air cooled on a bh6 mobo but i dont think it will go much faster. Most of my friends have the celemine 566 but mine is the fastest yet with no peltier cooling.

[martialcomp]

The new stepping seems to be a little better. I have a 667 running at 1000 mhz at 1.85 volts. Default voltage on this one is 1.7 volts. But, I admit, I was not sure if it would do it or not. I was running a 566 at 850 (would run 935 if I could stand the odd pci bus speeds) before this one. I admit, this is only the second day on this chip.