How high voltage are you using with your Cel2

[seve]

I am running a cel566@910 at 1.8 when I push it to 920 it freezes when ever I am playing CM3 would help to up the voltage and is it safe?

[wild_andy_c]

I have installed at the moment a cB0 600@945 at 1.85v with a Fandaptered Alpha in a Soyo SY7VCA.

This combination of elevated voltage to a sensible level and extreme cooling (80 x 80mm Sunon 40CFM funnelled onto Alpha), and primarily BURNING IN, also paired with utilising a good silicon grese for thermal conductivity gives such stability.

If you goto the overclockers Seti@home page and look at my stats, you'll see I must have some machine speed and stability in order to average 4hours 40 over 75 work units!!!!

BIG UP ME!!!!!

[Lucky]

You can go to 1.95 but i wouldnt i have a 566 cbo o/c to 952 at 1.85 volts with a gorb i can go into windows at 1gig with 1.9 but it locks after i need an alpha to do it as my gorb isnt cooling fast enough at the gig barrier o well for $20 you cant go wrong it got me to 950 with a temp of 46 under full load