k7n2 delta wont boot

help been trying to push my board on a bit with the fsb took it to 200 to see if it would boot it didnt all im getting is the continous beeps probably from my video card
now ive tried to restart with the junper j10
took out battery flushed cmos with the jumper
cold boot (well i am desperate)
now im just wondering if its my graphics card that may be to fault i have an ati radeon 9600 pro
i havent got another card to try but the card is workin in my other rig
does any one have any suggestion on how to get my board back to life
dont suggest rma please cause this is my second board the other was faulty i dont think the guy beleived me the first time lol

while im here i have a 2600 thourough bred b in it
with 512 of ram
please help if ypou can

http://bioscentral.com/beepcodes/awardbeep.htm

i would look to your ram,try the d bracket as well

d bracket keeps halting on the video card when i take the card out no beeps i think my card is out of sync with the agp slot and i dont know how to recover it

I wouldn't put too much faith in the D bracket. Sounds like a RAM problem to me. Any other memory you can try?

tried both sticks on my other pc running mem test ran ok ran everything else too wih no problems

Bummer, looks like another possible RMA.

Isn't the 9600 pro a 4X card? Change it to 4X in bios to see what happens.

cant get it to boot past the beeps and it wont accept a pci card either doin ma head in lol

Try this:

Put the system FSB jumper on 100, reboot. Shut down, put the jumper on 133. Proceed. These boards can be a bit cantankerous but seem to recover well.

Good luck