Dual Celermine 533A@800 Socket 370/Slot1 questions

[mgrooms]

1) When using a Celeron 533A FCPGA in an ABIT Slocket III adapter, what is the correct setting for the PPGA / Coppermine jumper? It seems to work either way.

2) Is anyone having trouble with the Vcore selector jumpers? When set to 1.5V, it won't post. I changed the jumpers to 1.7V & no post. I accidently stumbled upon two combinations that gives me 1.9V at which point it posts fine, but I'd like to get down to a lover Vcore if possible.

3) Do these (ABITs) slocket adapters support dual Celermines?
What's the best Slocket adapter to use for dual CPU operation

[Tim-]

First- you should set the slotket to coppermine.

I have a 533a and it likes 1.85v minimum to run at 800+. At 1.9v it runs stable at 896MHz.

You cannot run celermines in dual configurations. Intel disconnected the SMP control lines so that they no longer exit the chip die- they didn't want them to eat into their server market. Original celerons and PIIIs are the only ones to support SMP.