VOLTAGE ON ABIT BH6 cel600@900.....

[AMEUR]

Hi,

I've a Abit BH6 with Celeron 600 on an adaptator 370(abit)

My problem is :

I can't overclock it in 900 because i can't update the volt more than 1.70 !!!!
Why ? I'm sure if i get to 1.75V it'll be stable.... but in 1.70V it crash so often....

What can i do.... my bios is "SS" and the adaptator is set as default.
(If i set adaptator to 1.75Volt the bios boot as 1.50V..... grrrrrr)

please Help me !!!
AMEUR

[AMEUR]

I forget to said :

I'm under Win Me
I've a GlobalWin cooler and my CPU is never more 85-90°F
In cel600@900 with 1.70V Win Me load and run, but games crash ...

How to get 1.75V ??? Help
AMEUR

[wild_andy_c]

reflash the bios using the cc settings as detailed on the ABIT site or alternativeley use some software from the Rise Of Abit site at http://gamma.nic.fi/~hippie/ in order to increase voltgae.

I can't believe this is all the voltage you can get on a BH6

[Sempei]

You're right Andy, he can definately get more. I first flashed my BH6 "SS" bios with my old Celeron 300a and when I plugged in my CellyII 600 I had voltages up to 1.9. Set my voltage to 1.9 and flashed the "SS" bios again and got voltages up to 2.05. What you need to do Ameur is set your voltage to the highest you have available, then flash the "SS" bios again. You will have higher choices.

[AMEUR]

Hi,

Thanks, i do that (flash....) and it's right ! now i'm cel600@900 in 1.95V :)

Greetings