Celeron 667 Project ASUS Mobo - HELP

[js1974]

Here is all the information I know about the Celeron 667 I just purchased if anyone could relate as to what max speed I should be able to achieve I would greatly appreciate it.

MOBO - ASUS CUSL2-C Intel 815EP Chipset

Celeron 667 - MALAY
667/128/66/1.7V
Q045A841-1156 SL4P9

Any reccomended cooling/voltage setting/FSB settings would be greatly appreciated.

[Tim-]

The obvious goal would be to reach 100FSB- although that will require big time cooling- Alpha or Global Win would be the likely candidates. A Vcore of 1.8-1.85v would also be needed in all but rare circumstances.

[wild_andy_c]

Fortunatley this is a cC0.

Unfortunatley it's a 667. A multiplier of 10 means a 100Mhz FSB speed of 1000Mhz.

I would not pin my hopes too highly on getting it all the way there.

1.90v is probably required. Burning in is definatley required. A FOP38 or better is definatley required.


Good luck