New & wanting a view on celeron 466 O'C

[Kiwi-rat]

Hi all,
I am absolutely new at this so forgive my ignorance..
I have surfed some of the posts for help but we all need to start somewhere.
I have a GigaByte GA-6LM7 M/B with Intel 440LX AGP bios. It has hard jumpers @ 66/75/83mhz.
I am running a Celeron PC6 2.0v 466a mendocino PPGA Socket 370 at 66fsb & multiplier of 7.0,
128mb ram, Win98se, Voodoo 3 2000AGP, Soundblaster liveplayer.
Is it possible to O'clock this system with too much trouble?

[dadx2mj]

Might has well give it a try start by bumping the FSB bus up to 75 Mhz just keep an eye on your CPU temp you mihgt need to get a better heast sink and fan

[Tim-]

Most of the ppga celerons top out around 600 or a little less. You can probably run 75FSB without a problem, and possibly 83 if your cooling is up to snuff. I would definitely give it a try! I have a dual 533@600 and it seems happy, but would not go any higher.

[Kiwi-rat]

Thanks for the replies..I will give it a go.
Krat

[Kiwi-rat]

Well that was simple...
Changed jumpers and wella...
526mhz
No probs with the reboot and all systems seem normal.
Board temp has risen from 44c to 47c & steady with cover on, cpu temp @ 44.5c [room temp 28c]
Might give her a work out with a game or two to see what happens....

Krat

[Tim-]

That's fairly warm- although the ppga chips run that way. A better cooler would probably be called for to go any higher.

[Kiwi-rat]

Thanks Frank.

My PCI Bus speed is now at 38mhz with warning from SiSandra [norm 33]
Any idea how to change the fsb/pci multiplier. My MB bios does not seem to support a change anywhere that I can see.
cheers.