Specs on PC,Can it be O/C'd?

[gizmo3472]

1)Mobo: Intel Freman ZX.
2)Ram: 32 MB.
3)FSB: 66 Mhz.
4)Bios: AMI.
5)PCU: Intel Celeron 433C (5Th week).
6)Jumper Cables:?Dunno?
Can i just up this f'ker to about 500 or so?Please help me.

[Jon]

Probably have to refer to a manual if you have/can find one. Probaly have to use jumpers as well. With the old Celly cores you won't have much luck pumping alot out of it but 500 may not be out of reach.

Check your mobo for any jumpers that will allow you to up the FSB to about 75 as that is as far as I would want to go with it. If 100 is your only other choice, which it may very well be, then I'd say you're stuck.

[gizmo3472]

Problem is,Have no book,And i have no freggin' idear what a jumper looks like.....Anywhere the book is available?

[MartinT]

My old 433C ran cool as a cucumber at 541mhz (FSB at 83mhz) however I was using a BX board, I don't know about the ZX. Still, get the exact model no. of your mainboard and check the net for a manual for the jumpers and a bios update. It should work.

[gizmo3472]

Thanks Martin&Jon!
Ya'll been helpful!Now i'm off to search! Thanks again (Says to myself i'm gonna be king of my pc again!)