After searching day and night.... CPUCOOL!!

[cflores]

I finally found a program that has my PLL. CPUCOOL, one thing. My voltage is too low to go up at all. I tried to go down and that worked. My vcore is at 1.46 for some reason. Motherboard won't let me change it either. I guess what i'm tring to ask is, does anyone know of a way to hack the voltage or a program to set it?
600 cele. cBO v1.46??
pcchips motherboard m758lmr
sis630 intergated video

[GauntMan]

I´ve not heard of any software to change voltage. If your cards is a slot1 you can get a slocket with the option to change voltage. Othervise there may be jumpers on your mobo. If not, I think you need a new mobo to succeed. Sorry.

/GM

[Mr B]

How on God's green earth are you getting a cB0 Cellie to do anything at that low a voltage?? Default is 1.65 for that, isn't it?

That is one strange mb, won't let you raise the vcore, but it lowers it on you.......

I still say it's the board......PC Chips are not renowned for a great product.

Mr B

[cflores]

Mr B (Feb 13, 2001 08:11 p.m.):
How on God's green earth are you getting a cB0 Cellie to do anything at that low a voltage?? Default is 1.65 for that, isn't it?

That is one strange mb, won't let you raise the vcore, but it lowers it on you.......

I still say it's the board......PC Chips are not renowned for a great product.

Mr B
On the chip it says 1.5v. All the read outs are reading 1.46v. Humm...

[Fingers]

I tried that CPUCOOL.

I took it straight off.

I started it up and Immediately my bios alarm for the chip temp was wailing in my ears. It rocketed the temp to a staggering 89c in a matter of seconds and luckily I have the bios temp shut down on or things could have been worse.

Not very good I thought.

[cflores]

At first i had the same problem. My alarm went off right away. So i just tried different setting, and found the one that was right for me. Hell i tried every setting the software had to offer. Only one of them set right.

[SP]

cflores (Feb 13, 2001 10:54 a.m.):
I guess what i'm tring to ask is, does anyone know of a way to hack the voltage or a program to set it?


http://www.hardocp.com/articles/intel_stuff/bumpvoltage.html

[heavenly]

hi , No hacking for the vcore , just get yourself a new motherboard , the one you have will proberly blow anyway if you can get it too overclock your cpu.
Sorry for the hard answer but it is reallity. Good luck

[GauntMan]

Just want to tell people that there is no problem running cB0 at 1.5V. Thats what the auto sets it to. Now I´m overclocking so it´s up to 1,7V. But 1,5 really is printed on the chip.

[cflores]

I got this baby running at 750 right now. This will work for now!

[tdm5032c]

You want a real processor, go with AMD!!!!! The Athlons are great!!!!

[wild_andy_c]

I'm sure saying buy an AMD isn't really gonna help.

The motherboard is really the worst that kwick-e-mart sells. PC chips, Jetway and Elite have most of their market base in the far eats where they're made. They are cheap tat. They are ill capacitated.

Although you have the option to upvolts as in the article at HArdOCP (although there are other articles on the web that are better), I don't really think that your motherboard would be too pleased about haveing an overclocked processor in it - such is the instability of such poor equipment.

As said by someone else in one of the other postings - get a new motherboard - sorry

[marty]

Apu, I like your answer.

[cflores]

For days i searched looking for a way to overclock my cele. I got it running at 750, which seems to be only a 20% increase. I've had it running and burnning for three straight days now, no problems! I have a guy making a plug-in for Soft FSB for me. I am going to try the settings that it has to offer, since all the setting for Cpucool did'nt work accept one. 83.3 is the bus i was able to pull out, all the rest of them just frooze my system. I bought 128MB of pc133 memory and i am looking for a new motherboard. My goal with this cBO is 950mhz. Its a 600mhz celeron, and i must say i'm impressed with its potenical.