PDA

View Full Version : help!!!!p3 733 w/tyan 1854 mb

wired
02-22-01, 07:58 PM
cant figure out how to over clock this one....changed the jumpers but still reads as a 733 at start up....am I missing something?please advise.
Killian
02-23-01, 12:01 AM
Jumpers wont do anything. you need to change the FSB. in your BIOS it is under "Chipset Features", then change "CPU Clock/Spread Sectrum". There is no voltage adjustment but if you have a slot1 chip you can modify your mobo to get any voltage. heres a link :

http://www.wizard.com/~scfoster/tgrfix.html

I have the same board and i did ths mod. P!!!850@952 1.95v

Max
Roachvan
02-23-01, 10:45 AM
this site will tell you how to overclock the trinity 400 mb
http://www.hothardware.com/hh_files/Motherboards/TyanTrinity400(3).htm
wired
02-25-01, 03:27 PM
Roachvan (Feb 23, 2001 10:45 a.m.):
this site will tell you how to overclock the trinity 400 mb
http://www.hothardware.com/hh_files/Motherboards/TyanTrinity400(3).htm
thanks...next proble,....mb wont except the flash...what now?
Azazel
02-26-01, 08:32 AM
i just got rid of that same setup... i cant remember if you can change the FSB from the BIOS... i really dont think so. i know i cant on my Trinity K7. so go and download CPU Cool. it works great, and i think that the mobo is in the selection. good luck!!!!!
Azazel
02-26-01, 08:32 AM
i just got rid of that same setup... i cant remember if you can change the FSB from the BIOS... i really dont think so. i know i cant on my Trinity K7. so go and download CPU Cool. it works great, and i think that the mobo is in the selection. good luck!!!!!
whiskey![Nw]
03-08-01, 09:05 PM
I personally think that your Motherboard needs to be thrown in the trash.....go with abit or asus!!