P-III 733 almost have it need some help

[dolomyte]

Ok, I can get this system to post and load WinME fine up to 150mhzFSB. When I run games though it eventually just drops me out. I am running the AGP bus at 1/4 and Voodoo 3 is not overclocked. I'm running 256 of PC133cas3 at 100mhz and upped the voltage to 1.70 on the core, and chipset voltage up to 3.4. My mobo does not list IO voltage and I am assuming that chipset voltage controls all of IO settings.
I am not getting any memmory error blue screens, so I think it must have to do with the AGP. Does anyone have any suggestions as how to proceed with this. I would like to at least be able to run stable at 140mhz. Here are my system specs: P-III 733EB,256pc133cas3,MSI-6199VA mobo,Apollo Pro 133a chipset,Voodoo 3 3000 AGP.

Thanx!!!!!!

[LimeyGreg]

V-core to 1.9v Be sure to watch the temps and be sure you got good cooling. Burn it in @ 1.9 and then see if it's stable at lower Vcore.

P3-550e@825 (fsb 150) Vc@1.9v CPU @48c max when running BurnBX, 35c running folding@home in console.

[[OC]_SR20DE]

emm... I think upping the Vcore to 1.90 is bit too high for a P3 733@ 140mhz bus.. i think it's too much to begin with.. I advise you not to do it.. and change your voodoo card. The voodoos dont handle very well at very high FSB speeds no matter what you do with the AGP ratio setting.