- Joined
- Nov 6, 2003
- Location
- LI, NY
Well, Im still having a lot of trouble getting my system to run stable. Right now I have it running as follows:
217x11
1:1
1.95Vcore
2.8Vdimm
1.7Vcc
2,2,2,11
Bios 19
I just ran memtest for about 10 hours and I didnt get a single error so Im pretty sure my ram isnt causing the problem. However, after trying the vdimm mod and running into more stability problems I removed the mod. Since then, I now get errors running memory in the 2nd dimm slot no matter what the settings are. So now I have a stick in the 1&3 slots running dual. Anyway, my problem is that I cant run 3dmark01 for long periods of time and I cant run the blend torture test in p95 for more than a few hours without getting errors. Is there anything I can do to eliminate other things as sources of the problem so I can figure out exactly what is causing the problem. If theres any other important info or settings I left out just let me know.
217x11
1:1
1.95Vcore
2.8Vdimm
1.7Vcc
2,2,2,11
Bios 19
I just ran memtest for about 10 hours and I didnt get a single error so Im pretty sure my ram isnt causing the problem. However, after trying the vdimm mod and running into more stability problems I removed the mod. Since then, I now get errors running memory in the 2nd dimm slot no matter what the settings are. So now I have a stick in the 1&3 slots running dual. Anyway, my problem is that I cant run 3dmark01 for long periods of time and I cant run the blend torture test in p95 for more than a few hours without getting errors. Is there anything I can do to eliminate other things as sources of the problem so I can figure out exactly what is causing the problem. If theres any other important info or settings I left out just let me know.