BigAir
02-27-01, 09:01 PM
I have a N440BX INTEL Dual Server board set in a nice Intel case, 96mb PC100 Memory (1-64mb 1-32mb), 4.3 gig Hard drive (for now), 40X SCSI Cd rom, 300watt P/S, Dual 350 PII CPUs with mtching numbers, and a 5 bay SCSI Raid Bay. The problem is that when I load windows, the computer locks up after Windows is loaded and is booting for the first time. I thought "OK" so I loaded @Windows on a different computer and took the ready to go hard drive from the other computer to the dual server and booted it. It loaded windows and loaded most of the drivers and asked to restart, so I did. It loaded up again and had errors in device manager under the SCSI device. I can load the drivers and then restart but it then locks on start up. There are no devices in the bay untill the drivers are loaded correctly. I have also tried to boot with an IDE cd-rom drive to eliminate the only scsi device. No Go. I have goofed with the jumpers on the raid cage and still no go. I have tried loading windows 95, 98, 2000, 2k server, and 2k adv server with the same results. Any help would be greatly appriciated. Thanks!