celeron flipchip

[50feet]

I got my 566 celeron @702 rocksolid but if i go from 83mhz to 100 bus my video card wont work(creative tnt2 32meg ram)

. Why? I have pc100 in the dimms, the mobo supports 133. So im not really o/cing my pci/agp bus am I?

Is this where I would Up the cpu core voltage(If my mobo supported it)?

[Tim-]

Oh yes- The PCI and AGP bus clocks are derived from the FSB with a fixed divider. Usually 1/3 for PCI and 1/2 or 2/3 for AGP. Changing dividers can help occasionally, but the same problems usually happen when the bus is underclocked as when they are overclocked.

What Vcore and cooling do you have?

[DocClock aka MadClocker]

I agree with Tim,
Just set your pci to 1/3, and your agp to 2/3,fsb to 100 and reboot and you should be ok.

I might also mention that when I have gone too far in fsb, when I try to boot, the video card won't init either