P2 333 100Mhz sticky tape goes where?

[Sohryu Asuka Langley]

which edge do i cover to get a 100Mhz FSB?

I replaced my old Gigabyte GA686BX (rev2) and SL2QF 333Mhz P2 with more crap stuff: GA-6VXE7+ and cBo 700Mhz Celemine. Seems like my old system was more responsive then the new one...oh well...

anyway... i was having fun and managed to get the plastic case form the P2 of by prying the corners of it apart with a flat head screwdriver... PCB isnt close enough to the edge to get scratched... oh yeah.. what did i want?

Which edge connector pin do i cover to get the FSB to 100Mhz?

and will a Asus PV?4X (urm slot1 via i think) do for 500Mhz? (along with a nice big home made heatsink)

[marty]

I think the answer is here:

http://forums2.overclockers.ws/forums/UltraBoard.cgi?action=Read&BID=3&TID=1764&SID=58335

[Sohryu Asuka Langley]

Thanks marty, i rembered it in here a while ago which made me hack my p2 in the first place... time to get some sticky tape :)

[Phil]

pin b21 and I found nail varnish is good as long as it's an enamel one

[Sohryu Asuka Langley]

I've got no HSF and slot1 mobo right now anyway.... unless someone can fix a bad flash on a GA 686BX (was looking for a replacement chip but its longer then most LX/BX bios chips)

[Phil]

Does your computer beep 3 times (depending on the bios type) and then try to access the floppy?
If so you can repair it by making a bootable floppy with an autoexec.bat file that automatically flashes the bios as most bios's keep enough information during a falsh to get ISA devices working so if you have an ISA vid card you can see what you are doing

[Sohryu Asuka Langley]

award 4.5PGM or something like that... urm... actually... if i recall.. powers up and thats it nothing else.. no beeps no nothing... had a power outage as it was flashing :( bad bad

[DocClock aka MadClocker]

Order a new bios chip..either from your board maker, or from Award...maybe $40.00 investment..look on awards pages and see if they can help out..who knows, you might end up with features the maker never implimented, but were always there.

[Sohryu Asuka Langley]

yeah ill try that.. better then spending more on a new slot1 mobo anyhow.. i liked that GA686BX rev2 (anyone else have that?)

any how.. mine had GREASE under the greenie when i got it!!!!!!!! (well its black but you know what i mean by greenie)