celeron2 733fcpga [sL4p3]

[spell]

hey. i have a boxed celeron2 733fcpga (66x11, sL4p3) on a Gigabye GA-6OXM7E mainboard, and i cannot reach any higher than 770 stably. i think it's the hard drives that are puking, but i am not sure. i cannot reach 100mhz FSB with the "Magic Booster" 10% voltage increase. please help!! i have:

128mb Mizu****ty RAM cas2@112 on old comp
64mb Kingston ValueRAM cas2@112FSB on old comp
64mb Generic cas2@112 on old comp
3D Prophet II MX AGP @ 175mhz core, 200mhz RAM
Linksys EtherFast PCI 10/100 LAN card
dual 10GB Quantum Fireball 33mb/sec HD's
Toshiba 32x CD-ROM
80mm intake fan
PSfan blowing out.

[Tim-]

The odds on getting to 100fsb are not in your favor with a celermine. It for damn sure will take more than 10% increase in Vcore though. With that high of multiplier, when the core runs out of steam, I would be afraid of being stuck at an fsb that will make my peripherals very unhappy

[dimmreaper]

Sounds like you need to wire some vidpins for more voltage. You may also need much better cooling possably even supercooling. the 733 is just a bad choice for a celeron.

Check my wesite out for the vidpin wiring guide.