P4 2.6c @ 271 Fsb

[victoriaharbor]

OK, I finally got my system all set to go- Finally got the SP-94 with smart fan 2, applied the arctic silver and let it cycle for 4 days. I'm running a P4P800 Deluxe with a 2.6C and I just went to the following settings: 271 FSB 5:4, Ram at 2-3-2-5, VCore at 1.60, Ram voltage at 2.85, Turbo disabled. I ran Prime for 3.5 hours so far, and it seems fine. No errors or warnings, so I am going to run it for a while tomorrow and see what I can find. Anyway, my question is this: AsusProbe reports temps about 91 F load and about 84-86 F idle for the CPU. I know the program is off, but does this look safe? Is running at these settings (given that it WILL work stable) safe to run day to day or are these settings too high? I know you guys run fast systems, but is my 1085 MHz FSB too high for day to day? Because if it isnt and this runs stable, I want to obviously get it a bit higher. Let me know where you think I should go from here.

[situman]

can you go higher? and can u please list ur full specs and settings? and where u got ur cpu from

[bravestennis]

got mine up to 268. What you running?

[zip22]

wow, sounds nice. if its stable, then its safe i'd say. your temps sound excellent.

[jhl3]

I would also like to know the info on your cpu

[victoriaharbor]

Ok, the information below is exactly as the box says:
Product Code: SL6WS
MM#: 852645
FPO/Batch: L339A958
Version #: C30469-006
Malaysian pack

I have it running of a P4P800 Deluxe with an SP-94 and 1 GB Mushkin PC3500 Level 2. It is all on air cooling, but I have 10 fans in total in the case either 80 or 92mm (not counting PS, for obvious reasons), all pushing over 40 or 50 CFM. Anything else you guys want to now, let me know. I tested it with SiSoft Sandra 2004 and it says I am hitting about 5200-5300 MB/s, but I really want to hit 6000 or more. If anyone is there with a similar system do you have any ideas how to hit that?

[situman]

the highest i can get mine is like 266 fsb@1.675v i want to hit higher but not really sure how to mess wit the settings, NB-strap and etc. i have 1 gig of the lvl2 mushies@2225 auto auto da da. Im afraid its still not too stable. any ideas on how to adjust my settings?

[Grandpa Dan]

Check my sig. Thats after the volt mod. My ram is getting 3.2 volts.

GD
P.M. me if you need to.