Celeron 633 owners post your oc results(and temps) here

[Trap]

Please post your oc results and temps here.
Thx

[HeNry2cOoL]

cC0 633Mhz @ 950Mhz @ 1.9v @ 105.3F with stock intel fan/heatsink on a iWill Slocket II.

[Petebert]

just put a cB0 633 in today with a golden orb, so far its up to 790 stable at the default 1.65 volts, 950mhz was nothing at 1.65v, put it up to 1.85 and got to the windows loading screen but it locked up there, at 1.8 i get nothing when i return from the bios

[Trap]

Nice i have cB0 and i ll try to pull the maximum today of it..i have FOP32-1 plus 5 Sunon 80mm in the case for now idle 29C load 36C..let ya know what i manage to do ;)

[GDawg]

cC0 633Mhz @ 980 @ 1.85v @ 84F on a ABit BH6 FSB103 PC100 mem GldnOrb Extra case fans and airflow holes. Starts w98 @ 112FSB, but locks up. Not enough tweaks on this mb. Paid a few extra bucks for a pretested 950 guarenteed proc. Glad I did. Got screwed on the 600 I had. Only made 750.

[Travis]

I ve got that celly on 793Mhz at 1.8V and the temp under full load raises to 35°C . It also boot up on 950 but it is unstable with watercooling

[engjohn]

my cele 633 will do 1030 @ 1.95v STABLE!!! It idles at room temp (or lower when the water has cooled over night) and nerver gets above 32C.

[waldaize]

Temps
29-32C IDLE
42-44C FULL LOAD...

Check signature for Specs

[waldaize]

Ahhhh missed the cooling.

thats air cooled with a fop38.

Also, it will do 1064 but i have to jack the voltage up to 1.9V and it gets a little too hot.

Got a watercooled system testing at home, and i got my dielectric grease today so i'll be sticking on a 156W peltier when i get home..... I hope i can get over 1.1Ghz but my PCI devices may complain...unless i go straight for a FSB of 133 so that errrrrr 1263Mhz.....

Can i do it..can i get a 101% increase ......

we all no the answers probably no :-)