problem getting my celemine over 100mhz fsb

[EL-Blixten]

I need help with my C2 566/850
i cant get i stable over 100mhz fsb
my specs are:
Celeron 2 566/850@1.85V
Epox Slotket
Abit Be6-2 Rev 1.2 latest BIOS
Samsung PC100 Cas 222
ASUS V6800 Deluxe
Alpha PEP66

[Phil]

will it do it if you turn your cas settings down? Also is a cCO or cBO, the cCO's seem to go to 952 quite often but I have heard that that cBO's rarely get to or over 900mhz. Try turning your ram settings down and see if it works

[ken257]

I had the same problem when I first got my c566 and it gave me a hard time for a while. The problem was caused by having a powerfull fan right next to the chipset. When you put a good h/f on a slocket adapter the fan ends up sitting right over the chipset on most boards. By switching to a lower power 20cfm fan I was able to run at 1020 stable. This is just one of those strange things that can happen and is worth a look if all else seems to fail.

[Nomis]

http://www.cotty.btinternet.co.uk/vidpin.htm

If the slotket that you are using cannot manipulate core voltages than follow this link that will teach you how to rise your chip to 1.9V and higher. Very easy to do, you might even get your celeron into 900MHz. Good luck

[@crilicM@n]

Sometimes the slocket is the problem.... Lucky me 600@900 at the first try with a cc0 stepping and a generic slocket... Still misaligment with the heatsink... but I´ll get there.... (Further peltierwatercooling... waiting here at my side... he he)...
Maybe the cpu isn´t cooperating... With a pep66 temperature should be Ok... Can you ask some friends cpu borrowed for a day....? Did you set lower the cas?
Good luck.

[adkpat]

i have a 600@1008 running cas 222, and host clock+33=dram 145. I use air cooling also fop 38. alll this still wont touch a 800 duron performance. mobo is iwill vdpl. very stable. I'll just wait on a dual amd solution. Celeron=junk. we benched a duron 700@933 vs a p3700@933. With geforce2mx same ram and harddrive. the performance was almost identicle. what a joke intel is was overpriced, i'm off to the holy grail amd