help!

[x-ray]

hallo, i have a problem whit my celeron 400@500 i will clockit to 600mhz
now i have bus on 83x6 = 500 but when a run it on 100x6 are he crash
whit windows logo. what shoud i do ?
plz help me !

this is my bios when a runit on 600mhz :

bus:100mhz
multip. 6x
agp:2/3
speed error hold (or something like that) :disable
voltage: 2.20/2.30
mobo: ab-zm6

and he crash on windows logo (what do i do ?)

[Phil]

unfortunately the limit of an air cooled ppga celeron is about 600mhz, with most not reaching that. I would say that without some serious cooling that 600mhz is probabally beyond the chip

[Tim-]

I have gotten a few ppga celerons to make 600, but it's not easy. You will need good cooling and more Vcore most likely. 600 really is pushing these cores hard!

[JaY_III]

check to see if your motheboard supports the 90 or 95 FSB some have that... it is rare but some do.
You may get lucky 90*6=540 95*6=570