So what is the highest you guys have had the fsb?

[Door Knob]

I have an 800EB so I thought this question up in terms of all you 133mhz fsb guys but all you 700E guys out there can through you 2cents in two, heck even celly guys are welcome. I am just curiose how rediculas some of us have gone. Doesn't have to have been stable, or even posted, but what is the highest number you actually put in bios while thinking "Hmmm, I wonder..."

[Door Knob]

Mine is 184mhz right now which is giving me 1104Mhz! I wouldn't exactly call it stable though, hehehe.

[Rooster1]

celly 600 at 112 just doesnt seem to like 113 yet

[Miknow]

Hmm I would say 150fsb with a 733 doin 825 my mobo wont make it go higher

[DocClock aka MadClocker]

I have had this board up to 158mhz with a 600E, and 156 with a 700E.....I have not tried higher, but I'm sure it will do 158mhz with this 700E, but I don't wanna push it too far, I spent too much mulla on this chip. :-D

[Lancelot]

140 with a Celemine 800 doing 1120, but this locks up eventually. Right now I'm at 135 @1080 (one DIMM is a PC100 Siemens CAS2)

[LiViD HaTTeR]

800EB with 150 fsb. 901. Bleh. /me whats a gig.

[Mr B]

P/// 600E, Alpha P3125 hsf on an Asus P3C2000 mb. 159 FSB, 1.95v (954MHz)
C II 600, Alpha PEP66T hsf on a Soyo 6BA+III mb. 117 FSB, 2.05v (1053MHz)

Mr B

[Tachyon]

Door Knob (Apr 11, 2001 10:08 p.m.):
I have an 800EB so I thought this question up in terms of all you 133mhz fsb guys but all you 700E guys out there can through you 2cents in two, heck even celly guys are welcome. I am just curiose how rediculas some of us have gone. Doesn't have to have been stable, or even posted, but what is the highest number you actually put in bios while thinking "Hmmm, I wonder..."

800EB on an Abit SA6R. Highest stable FSB was 160. Running at 150 because I didn't want to keep the PCI freq up too high.

Terry

[Rooster1]

Mr B (Apr 12, 2001 05:11 a.m.):
P/// 600E, Alpha P3125 hsf on an Asus P3C2000 mb. 159 FSB, 1.95v (954MHz)
C II 600, Alpha PEP66T hsf on a Soyo 6BA+III mb. 117 FSB, 2.05v (1053MHz)

Mr B

like that voltage up a little high on that celly dont ya havent tried going any higher with the volt than 1.95 on mine

[Mr B]

Rooster (Apr 12, 2001 07:56 a.m.):
Mr B (Apr 12, 2001 05:11 a.m.):
P/// 600E, Alpha P3125 hsf on an Asus P3C2000 mb. 159 FSB, 1.95v (954MHz)
C II 600, Alpha PEP66T hsf on a Soyo 6BA+III mb. 117 FSB, 2.05v (1053MHz)

Mr B

like that voltage up a little high on that celly dont ya havent tried going any higher with the volt than 1.95 on mine

Read the sig below that post...you'll see where it got run usually. 1053 @ 2.05 was run for a month or so, trying to burn it in to lower the vcore at that speed....didn't work, so I backed down.

Mr B

[The Faceless Rebel]

LoL HaTTer
yep, a gig? whazzat??

[gav]

I once set my AMD k62 550 which is ment to be running at 5.5x 100MHz, at 2.2V. How ever I terned my mother bored alway up to maxmum, which is 6x at 140MHz, at 2.9 volts, it bourt up the win 98 intrduction screen before crashing

[6502kid]

I had mine running at 150fsb for a while. Stable
at stock voltage. Had to run memory at cas3.

Running 140 now so I can have all 512mb at cas2.

[ken257]

Asus CUSL2-C 866eb at 160fsb for 1007mhz

[ken257]

I posted the wrong number above. The speed of 1007 is from when I was running at 155fsb but now I am at 160

[outhouse]

got windows to run stable @169 have not booted @170 [but hope toafter burning in longer] 166 stable for gaming.

1g@1248 1.9cv [if i could get more juice i could run stable @higher fsb] :) 384 sdram, gf-2mx, lots of cooling mods

[Supafly]

Door Knob (Apr 11, 2001 10:08 p.m.):
I have an 800EB so I thought this question up in terms of all you 133mhz fsb guys but all you 700E guys out there can through you 2cents in two, heck even celly guys are welcome. I am just curiose how rediculas some of us have gone. Doesn't have to have been stable, or even posted, but what is the highest number you actually put in bios while thinking "Hmmm, I wonder..."

p3 1ghz@1245 (166 FSB) on ABit-SA6-Raid with PC133 Cas3 Cheapo OEM Ram and alpha pep66t

[The Stickie]

I've had my PIII 666 @ 151FSB on my culs2 but my harddrive didn't like it...

[zeisel]

i have had this bad boy PII up to 160 fsb. if i could get some more voltage it would be completely stable. all my components worked fine overclocked that high. i love this chip. cant wait to get my 700e

[AoD]

I've had my P3 450@675 with the 150fsb booted into windows but once I opened a few things, goodnight. Even at 2.2v it wouldn't hold. I've posted at 155 but nothing more availible with this Soyo board. BX is still my number one choice for the 800e I want to get soon.8.0x126=1008mhz.. 1gig with CAS 2-2-2... *Drool* heheh I'm at 126 CAS 2 @ 566 stable as anything at 2.0v (Default for this chip) so.. I know I could hit higher specially with all the fans I got blowing in my case :)