First overclocking experience...

anybody? look at my rig below... prime stable... am i ok now? or any suggestions on my settings? should i just set vcore to auto?

These are the values and I am still running prime right now... mem load is 98% cpu load is 50-60%

Asus Probe:
12v = 11.795 +/-
5v = 5.053 +/-
3.3v = 3.264 +/-
vcore= 1.61 +/- jumps to 1.568 back and forth
cpu temp=43/42
mobo temp=32

is my vcore normal?

Yes, your Vcore is normal for that board, Try clocking it in small steps, until it gets unstable, then experiment with vcore and vdimm in moderate changes.

hmmm or should i just set it at auto?

What divider are you using? 5:4 or 3:2?

I would set the voltage core manually and see if higher voltages will allow for a higher stable overclock.

im using 5:4... my cpu temp idle is 30 and loads at 43c... im running stable right now... so i will just leave my vcore?