Phase Change Question.. W Evap Heads on one system????

[Maglin]

I have a 1/2 HP compressor and a hugh ass Condesnsor that I'm going to use in my Phase Change system here shortly with the Baker block for my Evap. Head on my CPU... What I'm thinking is since my unit is actually so hugh is could I fashion up a Y fitting that comes off of the condensor and run two capiliary tubes out of it supplying Liquid refridgerant to both my CPU and also My NB... Then just run both gas returns from the evaporator's into another Y Fitting to the vaccume side of the compressor....

In my head is seems logical... As the High pressure side will still have ton's of pressure and be able to feed both evaporators... I plan on building the NB evap. head out of copper useing a small maze design and 2 levels to give it some length... I'm also planning on usieng a resivoir and drier/filter in the system... I'm probably going to be useing propane since I have 2 compressors so I can use the other as my vaccume pump to get everything out of the system....

[rhino56]

from what ive heard it would be a waste because it doesnt get that hot that it would need more then air cooling.
what is the temp of it anyways?

[SewerBeing]

maybe try and get it to cool your graphics card?

[Maglin]

The reason I want to cool my NB like this is because I have an Intel 2.4C D1 stepping... And in order for me to get the kind of OC that would make this worthwhile I will have to hit 333Mhz FSB.... On standard air that will really put some juice throught the NB and might make it to hot.... I'm just thinking ahead... Of course I would try it with and without it on the NB and see if I could just use it on my GPU.... Hell if it works out good enough that I can split up the Evap. Heads like this I can use one compressor and put Evap Heads on the CPU/GPU/NB and shouldn't affect my Temps but maybe like 1 degree as the system should be able to handle the added heat load with ease.....