FSB?

[ClOcKeR]

im new to this overclocking busness, i do know when i compare results with 3d mark 2001 my fsb is 66 mhz how do you increase ypure fsb?

[Tachyon]

ClOcKeR (Apr 20, 2001 07:58 a.m.):
im new to this overclocking busness, i do know when i compare results with 3d mark 2001 my fsb is 66 mhz how do you increase ypure fsb?

You need to give more info on your system. Do you know what motherboard you have?

[chriger1387]

You can change your FSB with programs like CPUFSB, or Softfsb. Select the new FSB in Windows, save it and restart. Don't change the FSB when windows is running.
And don't go to high. My 466Celeron is running with 490MHz. I've overclocked the FSB from 66 to 70MHz.
If i go higher my computer won't boot.

Good luck

[Shadow ÒÓ]

OC welcomes you!

there is NO simple answer. You'll have to tell us all about your system and exactly what you have.

Try the tips section on the main page

http://www.overclockers.com

see if you can find some info there....I'm sure you will.

Read a bit here in the forums....you really don't want to just "jump in" without knowing quiet a bit first. Don't be impatient....learn before you move.

[ClOcKeR]

MY system spec is

Prossesor=633 mhz
ram 192 mb (sd133)
Motherboard = MS - 6178 micro ATX
Graphics = integrated intel 810 really sucky (want to get mx pci)
Slots = 3xPCI (NO AGP )
SOund = integrated
FSB RUNNING @ 66MHZ I WANT FASTER!!!!!!!

[@crilicM@n]

Hmmm not familiar with the 810 chipset, but you cpu should accept well a 75-80 fsb and with some care, 100+ fsb... Probably the motherboard manual can give you safe instructions about how... :-)

[marty]

MSI is the maker of the MS6178 board. They supply a program that allows you to tweak the motherboard step by step until it locks up and then again until just before it locks up. They made this as an aid to overclockers.

I am not sure if it will work with your motherboard. I think that you may have it on the CD that came with the motherboard. The program is called Fuzzy Logic3.

Here is a link to download this program if you do not have it already:

http://www.msi.com.tw/support/feature/fuzzy3.htm

[ClOcKeR]

the link u gave me didnt work file was not found can u find any other loactions ofr me please i have looked i cant find it.

i dont think i had the program with my computer.

[ClOcKeR]

I did find the program it says my fsb is 115 mhz but i says on 3d mar 2001 that its 66 mhz im not sure about what to do please give me some advice!

the program is clalled msi bus racing

[ClOcKeR]

Hey i just cheated computer death i think?
i turned my bus up to 72 or down to 72 it depends on what u think from my other messages above.
It locked up and when i restarted it wouldnt go.

The first thing that came in to my mind was PANIC
i tunred off the mains turned it back on again and it worked and when i used bus racing it was the same as the image above.