overclocking Celeron Slot 1 766MHz

[jh]

Anyone had success overclocking this CPU? How far is it possible to take the 66 FSB with software such as SoftFSB?

[Max the Axe]

I've got a Cel566@whateveriwant, joking, on a AsusP2V slot1 and using SoftFSB i can set fsb 66, 75, 83; changing agp jumper and voltages higher than default (1,5V cB0) 100, 103, 105, 110, 112, 115, 120.
Anyway it depends on your mobo, maybe you can set 66, 68, 72, 75...90, 95...or step of just one unit , i dont know.
SoftFSB is still a good software. bye

[Phil]

I'll tell you now you won't reach a 100mhz fsb, I doubt you would even with a peltier, a 75 mhz fsb should be pretty easy for 825mhz, you should be able to get that at standard voltage with the intel cooler, if your board has enough options though you should be able to get to around 900-950mhz, but this would probabally need upt to 1.9v and better cooling, if you have one of those boards with only 68.75,83mhz options then I would say that 83mhz is not going to be easy, you will need to make sure that any pci components can take a 41mhz fsb or if your board can change the divider run them below spec, and even then 913mhz is a lot to expect with out good cooling and extra voltage, your best bet is to ty and sell that chip and buy a 600 and a Global Win FOP 32-1, this combo should easily get you 900mhz, maybe more