FSB@ Siemens D1107

[Jinx]

I have an Siemens D1107 Motherbord and a P3 450Mhz.
I want to overclock it but have no idea, how I can menage the Front Side Bus- Speed on this bord.

Please HELP!!

A Link to the Manual:
http://manuals.fujitsu-siemens.com/PCDOCS/A26361-D1107-Z120-US.pdf
or:
http://manuals.fujitsu-siemens.com/PCDOCS/A26361-D1107-Z180-US.pdf

[klosters64a]

The handbook or manual for your mainboard should tell you what you need to know. This will require some study. If you don't have the manual, Siemens should provide one that you can DL.

[Jinx]

That's a problem, I have the Manual, but there is NO entry for fsb.
there are a few switches. But the manual shows only the right position for the right processor.
E.g.: P3 450 Switch 5on, Switch 6 off....

That's my problem. I also used the "soft fsb" Software, but my Clock- Proßessor (IMI SC680...) is not in this List.