ol' man
02-07-04, 02:20 AM
Well I bought a KT7-A and a 2400+ today and it runs great on the mobo except it is locked. It seems to max around 2.2GHz on ~1.75v. Not that great. I need really good ram to get it higher I think on this old 133MHz bus board. It is for my freind and he could only afford the $35 for the mobo and the $99 for the proc locally. DDR would have been out of the question. He went from a 800MHz PIII on sdram(which was reused) to this 2.2GHz + XP. Pretty big difference and he is happy. I know nforce2 and dcddr would have been ideal but this got the FPS up in UT2k3 just fine.
Any suggestions on the best 4 in 1's for stability not necessarily performence?
The complete marking on the chip are,
axda2400kv3c
sixib0351spmw
Are the temps being read from the on die thermistor or the mobo thermistor under the CPU? I get three temp readings for this system. One is auxiliary and it is the highest so I figure that is the on die thermistor but I could be totally wrong. If it is simply reading under the chip is there a wat to mod the KT7-A by connecting some pins to the thermistor contacts under the CPU to read the true core temps?
Any suggestions on the best 4 in 1's for stability not necessarily performence?
The complete marking on the chip are,
axda2400kv3c
sixib0351spmw
Are the temps being read from the on die thermistor or the mobo thermistor under the CPU? I get three temp readings for this system. One is auxiliary and it is the highest so I figure that is the on die thermistor but I could be totally wrong. If it is simply reading under the chip is there a wat to mod the KT7-A by connecting some pins to the thermistor contacts under the CPU to read the true core temps?