celeron 400 to 500 and no more!?!?

[sandrax]

hi there,i've assembled the HEDGEHOG DELTA with ARTIC SILVER 2 on my celly but i can't bust it up to 500mhz(83x6.0)i tryed 100x6.0 but the monitor remain on stand-by while the system rebooting.All is assempled perfectly and the cpu temp is stable at 24-25°(i've an ASUS P3B-F mobo and i tryed from 2.0 vcore to 2.30 vcore voltage)what i've to get my celeron 400 stable at 600mhz?thank you for your help guys!

[Lancelot]

I had a very unwillingly Slot1 in-a-box Celeron 400 (SL37V) and I could get nothing more than 500, so I settled for 450 (6*75) which is safer for your HDD and perip.cards. The Mendocino on-die cache maxes out at around 550Mhz so getting it any higher than 500 would be of little use anyways. (sowwy)

[Elin27]

I got mine Slot1 Celeron 400 before and I attached my Alpha P3125S to this ****ty chips and I get mine to 500 stable...Well, Celery 400 (espeically not Celeron 2) is really tough to get the speed over 500. My friend's FCPGA 400 can get 540 with some additional cooling on....:)

[OpenFriday]

I'll post once i get my celery to its max. Ive got a 400 and i just got a gigabyte slotket. 32vcore adjustments. Yummy. Vantec with delta in the mail. Still deciding on mobo. I'll get back to you guys when shes set up. This ones "pre tested" to 570 but that was with agorb, im sure i can hit 600 with this bad boy. What were the codes of your chips? mines the fairly popular sl37x.

-OF