IT7-Max 2 2.0 RAM Question

I have two 512 MB Corsair XMS3200C2 modules. The Abit manual says slot 2 and 3 are sharing. Does this mean I should put these two dimms in slot 1 and 2 for best performance, or....?

Run them in slot 1 and 2....slot 2 and 3 are shared in the sence that you can only run 2 single sided modules in them at the same time....if you run 2 double sided modules in 2 and 3, they will only see half the ram....but running a double sided module in slot 2 with 3 empty is ok...

I found that slot 1 and slot 3 are the best slots to run as far as overclocking goes. Slot 3 is ok for whatever size memory as long as you dont put anything in slot 2, then that way it won't cut your memory in half.