L2 Cache for Celeron

[davidoff76]

Hi,
I was wandering which is the best configuration for L2 Cache from bios.
I have a Celly 300@450 on a BH6.
Davide

[Phil]

what settings are available, as far as I know most boards only offer the option to disable it or to enable/disable ECC which you should enable on both counts

[DocClock aka MadClocker]

If it is stable at 450, then leave the L2 at the default, it is full speed anyway, so let it run at 450 also, anything less would be a waste :-)