Help Fast!!!! Can't Get Internet

[wuzzapiman]

I've tried to repair, ive tried to manually specify all the addresses and my repair operation failed with: CANNOT REVEW IP. With all my settings at stock i get an internal ip.
-thankyou

[wuzzapiman]

I REALLY NEED help fast, please take the time to post

[Stu Pidasso]

What OS, what type of network hardware?

[wuzzapiman]

Xp, and A7N8X-deluxe

[Stu Pidasso]

Once again.... What type of networking hardware IE: connecton, router, nic(or modem)

[wuzzapiman]

router - Dell truemobile 2300 connected to cable modem

NOTE, the internet does work on another winXP computer

[Stu Pidasso]

Is the router set to DHCP? Have you tried to give the system a static ip? Have you gone to a cmd window and givin it this command

ipconfig /release yet? What is the ip the the system is getting?

[wuzzapiman]

yes, i tried manually setting the IP

the IP it assigns is the 169..... winblowz IP

the router works fine, as i said.

[Stu Pidasso]

Are you getting link activity or even just a link light?

[wuzzapiman]

yes, link activity

[Stu Pidasso]

Try this from a cmd prompt

netsh int ip reset

You can read more about it here (http://support.microsoft.com/default.aspx?scid=kb;en-us;299357&Product=winxp)

Gotta go close up shop. Check back with you later.

[wuzzapiman]

Ive reinstalled XP, that command did not work

[Stu Pidasso]

This may sound stupid but have you installed the nic drivers? What the lan ip of the router? and what did you set as a static ip on the system?

[Dubbin1]

Have you tried plugging into a different port on your router, restarting the router or resetting it? Is this something that just happened or did you install a new peice of software or hardware? Is the other computer that works fine setup on that router? If the 2 computers are networked together can they see each other? How are you so sure that the router works fine?

[Pepsi274]

I have a Linksys router here are a couple of things to check
1. make sure you see the port lighte on
2. acess the router using the lan ip add
3. make sure you dont require a user name and password
4. check for connection type e.g. PPPoe
5. make sure DHCP is enabled (it is on mine)

[Pepsi274]

And one more thing hook the modem up the the computer directly and if you get on line then you might have to adjust the settings in the router

[wuzzapiman]

I will try hooking up the modem

YES, nic dreivers are installed

NOTE: the problem originated when I went to a friends house and had a LAN game on a HUB, not router

[Stu Pidasso]

Oop's, sorry, I forgot to add the file name to the end of that command. Try this one

netsh int ip reset c:\resetlog.txt

[wuzzapiman]

i figured that out...

[wuzzapiman]

goddantanigfa yes i hooked modem..no go, and no i dont see the other computer on the network, but it is linking/pinging, GOD I HATE THIS PROBLEM!, SOMEBODY HELP !!!!!!

[jajmon]

Originally posted by wuzzapiman
I will try hooking up the modem

YES, nic dreivers are installed

NOTE: the problem originated when I went to a friends house and had a LAN game on a HUB, not router

Take the cover off your pc and check your nic to make sure it is properly seeted. The 'travel' to/from your lan part may have dislodged your nic.

[Pepsi274]

Are you running it as a wired or a wireless router ?

Are you running a software firewall or the firmware in the router?

I got the ip add. 169........ when setting up my network

i went into the firewall program went to firewall then zones and and it showed the 2 ip address so i had to apply the one i know is my network then restart then delete the 169.... add. and it workes fine