Voltage up to 1.9, FSB up to 118, CPU up to 1003 :¬)}

[markedmundb]

Modified sig says it all!

[Door Knob]

Is that stable?

Wow....what an awsome overclock.

Way to go man.

[FrankMasterFlash]

Thats a sweet o/c.

I wish my celly 600 would go to 1ghz without an extreme voltage increase.
cough-cough-2.3v-cough-cough

[markedmundb]

Stable as Wimpdows gets.

Stable enough to run Rally Champ 2000 (with Seti in the background)

Cut the volts to 1.85 and it's still "supersweeet".

Although I have to admit it's been running at 850 since Early March, after getting a good burn-in at 808MHZ/2.0V on my Abit Slocket, before I got the Soltek, and could run stable at 850/1.8V. Anything over 850 at 1.8V would cause registry repair loops.

This afternoon, I upped the volts to 1.9 on my Slocket (Soyo mobo only has +7.5%= 1.8v tops) and using SoftFSB I played with it. Got it up to 1003, but then it BSOD'd because of my RAM (PC100 CAS2 don't run at 140MHz+ even if set to CAS3) was set to HOST+PCI. I set it to HOST -my RAM is capable of 124Mhz CAS2 (used to run pII 400@ 496) - which is 118MHz.

Restarted the machine and Reg Repair appeared (as expected). Once Wimpdows had restarted, I used SoftFSB to up it to 118. I then installed & ran Rally Champ 2000, as this is the ultimate stabilty test. Ran 3DMark2000 (w/ strange results- probly to do with Vid drivers!) before restarting, going into the BIOS and setting FSB at 118 in the BIOS.

I got it to POST and load the Win98 boot floppy menu at 1003 (Boot floppy used so as not to screw Wimpdows) way back in March, so I knew POSTing wouldn't cause problems.

Temps aren't bad either. I got bored waiting for a replacement clip for my PEP66, so I'm using my lapped FKP32, which was on there before. CPU temp has only climbed 2*C from 850.

[LutaWicasa]

Yup, I find these lil' 566's pretty amazing :)

[markedmundb]

Luta, what volts are you running at, and what are your temps like?

[LutaWicasa]

I've been able to back it down to 2v (was at 2.05v) and under full load hasn't hit 40c, stays about 38c. This is with air only, but like 9 fans in all. I've got 2 120mm and 1 80mm intake, 2 80mm and 1 120mm exhaust. Delta 7K on the Alpha. 2 Sunon 80mm on PSU. At warm times of the day, I open the case and have a big window fan blowing directly inside. Now that summer is on the way I suppose I'll have to back'er down a bit unless I can get my H2O rig up :)

Before ya ask, no its not loud. Of course between years of shooting and doing hardwood floors with no ear protection I guess I'm not the best judge of louditude Hehehehe.......

[OpenFriday]

Very very nice, im waiting on parts for a cel 400 rig, eventually i'll get a 566 or 600, im leanin toward the 566 now :). I was about to pick up a soltek slotket myself but the store charged 15$ shipping to canada so i got a gigabyte pro, 32 vcore adjustments. Well thats a very nice OC, once the rig is built im getting a 566 for sure. Ohh yeah ive got a soyo 6ba +III (in the mail actually) Again great work!

-OF

[Mr B]

markedmundb (May 08, 2001 01:32 p.m.):
Modified sig says it all!

WTG !!

Another Celeron hits the 1 GHz plateau!! Sweet o/c, Mark!

Mr B