Hello!I'm new in forums and need some help.
My system: Athlon 2500XP+ ASUS A7N8X-E DLX KINGSTON 3200 256x2 120Gb Seagate MSI 5200FX 128T
I want to overclock my cpu.But the best i can do is 1980Mhz.
My bios settings are:
CPU EXTERNAL FREQUENCY :180
CPU FREQ MULTIPLE SETTINGS :AUTO
CPU FREQ MULTIPLIER :11.0X
SYSTEM PERFORMANCE :USER DEFINED
CPU INTERFERENCE :OPTIMAL
MEMORY FREQUENCY :AUTO
RESULTING FREQUENCY :AUTO
xSDRAM ACTIVE PRECHARGE DELAY :6
xSDRAM RAS TO CAS DELAY :2
xSDREAM RAS PRECHARGE DELAY :2
xSDRAM CAS LATENCY :2T
FSB SPREAD SPECTRUM ISABLE
AGP SPREAD SPECTRUM ISABLE
CPU VCORE SETTINGS :AUTO
xCPU VCORE :1.65V
GRAPHICS APERTURE SIZE :64MB
AGP FREQUENCY :AUTO
SYSTEM BUS CACHEABLE ISABLE
VIDEO RAM CACHEABLE ISABLE
DDR REFERANCE VOLTAGE :2.6V
AGP VDDQ VOLTAGE :1.5V
AGP 8X SUPPORT :ENABLE
AGP WRITE FAST CAPABILITY :ENABLE
CPU is locked.When i change multiplier it doesn't effects current speed.
When i increase cpu external freq to 191 bios doesn't boot when i diseable the halt on option windows doesn't start and a message appears
"file missing" <windows root>\system32\ntoskrnl.exe"
The temperatur observed in asus probe is 44-45 (i dont know if it is normal).What is the limit temeperature that cpu can work safe?
I dont have any information about ram timings.How must i change them?
What means MEMORY FREQUENCY :AUTO? What is the difference between MEMORY FREQUENCY :BYSPD
I'dont have any information about voltage? How must i change voltages and some other values when i increase external clock frequency?
I'm new in this overclocking world and need some help.
Thanks!
My system: Athlon 2500XP+ ASUS A7N8X-E DLX KINGSTON 3200 256x2 120Gb Seagate MSI 5200FX 128T
I want to overclock my cpu.But the best i can do is 1980Mhz.
My bios settings are:
CPU EXTERNAL FREQUENCY :180
CPU FREQ MULTIPLE SETTINGS :AUTO
CPU FREQ MULTIPLIER :11.0X
SYSTEM PERFORMANCE :USER DEFINED
CPU INTERFERENCE :OPTIMAL
MEMORY FREQUENCY :AUTO
RESULTING FREQUENCY :AUTO
xSDRAM ACTIVE PRECHARGE DELAY :6
xSDRAM RAS TO CAS DELAY :2
xSDREAM RAS PRECHARGE DELAY :2
xSDRAM CAS LATENCY :2T
FSB SPREAD SPECTRUM ISABLE
AGP SPREAD SPECTRUM ISABLE
CPU VCORE SETTINGS :AUTO
xCPU VCORE :1.65V
GRAPHICS APERTURE SIZE :64MB
AGP FREQUENCY :AUTO
SYSTEM BUS CACHEABLE ISABLE
VIDEO RAM CACHEABLE ISABLE
DDR REFERANCE VOLTAGE :2.6V
AGP VDDQ VOLTAGE :1.5V
AGP 8X SUPPORT :ENABLE
AGP WRITE FAST CAPABILITY :ENABLE
CPU is locked.When i change multiplier it doesn't effects current speed.
When i increase cpu external freq to 191 bios doesn't boot when i diseable the halt on option windows doesn't start and a message appears
"file missing" <windows root>\system32\ntoskrnl.exe"
The temperatur observed in asus probe is 44-45 (i dont know if it is normal).What is the limit temeperature that cpu can work safe?
I dont have any information about ram timings.How must i change them?
What means MEMORY FREQUENCY :AUTO? What is the difference between MEMORY FREQUENCY :BYSPD
I'dont have any information about voltage? How must i change voltages and some other values when i increase external clock frequency?
I'm new in this overclocking world and need some help.
Thanks!