Random Restarts with New Mobile Chip

[dwdrummer0]

Hello all!

Ive been getting random restarts with my new mobile 2500 at 2700mhz. My older 2500 never did this. My PSU is an enermax 650W so I dont think thats the problem.. Maybe I need to reseat the RBX.. Ive got the rig about 6 hours of prime 95. But if I run prime 95 and lets say brows the internet and play music, then the computer will restart


what do you guys think?

[jonspd]

Huumm look's like the max of you colling\cpu @ the moment. I would just hunt for a safe spot around 2.6ish and be done.

[rudnik68]

Raise voltage (if possible) or decrease speed.

[iLLestOne]

Sounds like your oc' isn't stable. Do what they said, raise volt's (if temps are good) or back off oc.

[ChillPhatCat]

Well I've got a 500W PSU and it's doing almost the same thing to me... only when it's at 100% load... I was looking at my rails and my 12V is dipping to 11.4V under load... one small inconsistancy and it restarts without any BSOD or anything... and this happens anywhere from 2.4-2.7GHz... the fact is that my PSU is crapping out on me and that is what I'd have to suggest checking first... do you know your rails are good?

[dwdrummer0]

all rails are good... 12v is ranging from 11.86-11.95 on load.

I lowered my timings on my ram. testing now, 3 hours of prime so far

[Molester]

man, i'd be scared if my 12v rail changed fromv the 12.096v it's always at, that's w/ 2.000v vcore, 3.23v memory, 1.7v agp, 1.6v chipset

edit: also, what else do you have plugged in on the circuit your computer is hooked up to? i'd take anything off the circuit w/ a motor