ddr400 posting ddr333?

nightmare3215 · Feb 15, 2004

I have an Nf7-s v2 board and 1x 512mb stick of geil valuram pc3200. I changed the memory settings to by SPD and it's still posting ddr333 when I start up. I have changed the settings to auto to no avail.

How can I fix this? would a bios update do the trick?

ciku · Feb 15, 2004

does ur mobo support pc3200 @ 400 ddr?

blownsix · Feb 15, 2004

mine does the same thing i got it to work one time but cant rember what i did

ciku · Feb 15, 2004

blownsix, it would help if u put ur rig on ur sig but going to profile, edit profile

Drisler · Feb 15, 2004

You don't need to fix anything.
Run your memory speed at the speed as that of your FSB.

@166fsb ---> DDR333
200fsb ---> ddr400.

And disable SPD. Set it to 6:6 or something.

SewerBeing · Feb 15, 2004

The mobo automatically sets the mem = to the fsb, unless you put a divider on it. Since Nforce2 mobos perform best when the mem and fsb are equal, you have nothing to worry about.

nightmare3215 · Feb 15, 2004

so leave it at ddr333?

nightmare3215 · Feb 15, 2004

bios update did not do the trick, though windows loads a tiny bit faster now.

SewerBeing · Feb 15, 2004

leave it at the speed at which your fsb is, if your fsb is 333 mhz the memory should be at 333mhz.

blownsix · Feb 15, 2004

il leave it alone until i overclock then

ddr400 posting ddr333?

nightmare3215

Member

ciku

Member

blownsix

Member

ciku

Member

Drisler

Registered

SewerBeing

Grasshoppa Senior

nightmare3215

Member

nightmare3215

Member

SewerBeing

Grasshoppa Senior

blownsix

Member

Similar threads