- Joined
- Dec 19, 2003
I've been trying to o'c an Athlon 2100+ but I can't seem to get it stable past 2gigs. I've tried numerous things: increasing multiplier and raising fsb (and vice versa), upping the volt core and ram voltage, etc.
Sometimes it won't POST, other times I'll get blue screen of death before booting XP Home, and when I do get into XP Prime95 freezes in the first few seconds or I get a SUMOUT error.
Here are my exact specs, any advice would be appreciated:
Athlon 2100+ (unlocked, JIUHB)
Vantec Aeroflow HSF
Shuttle AN35N Ultra with most recent L BIOS
2x256 Buffalo PC3200 Ram (running in Dual Channel; passed 24 hour Memtest)
Fortron 350W PSU
2x120mm case fans (1 front intake, 1 rear exhaust)
From what I've read this CPU should go to 2.2g easy. Anybody here have any advice for me.
Thanks.
Sometimes it won't POST, other times I'll get blue screen of death before booting XP Home, and when I do get into XP Prime95 freezes in the first few seconds or I get a SUMOUT error.
Here are my exact specs, any advice would be appreciated:
Athlon 2100+ (unlocked, JIUHB)
Vantec Aeroflow HSF
Shuttle AN35N Ultra with most recent L BIOS
2x256 Buffalo PC3200 Ram (running in Dual Channel; passed 24 hour Memtest)
Fortron 350W PSU
2x120mm case fans (1 front intake, 1 rear exhaust)
From what I've read this CPU should go to 2.2g easy. Anybody here have any advice for me.
Thanks.