- Joined
- Feb 24, 2004
- Location
- TURKEY-ANKARA-INEGOL
I have corsair xms 3200 256 ddr.what I should do it best?(timingz, fsb)Which fsb speed can I reach?which fsb speed and timings you who has that ram reach at the most?goodbye
-
Welcome to Overclockers Forums! Join us to reply in threads, receive reduced ads, and to customize your site experience!
CorsaÝr Xms 3200 256 Ddr?
- Thread starter galatasaray
- Start date
- Joined
- Jul 24, 2002
- Location
- Lost in Thought
It depends on the revision that you got. If it's a v1.1, it will be made with Winbond BH6 chips that can do speeds in excess of 250MHz with tight timings (I think an Xtreme member hit 277MHz). Any other revision and you'll be lucky to do 220MHz with decent timings. I'd test the stick at stock settings first then gradually increase the FSB if it runs stock speed without errors. Additionally, your motherboard will limit your FSB to 230MHz or so...only the DFI boards can do 250MHz with any consistency.
~THT
~THT
OP
- Joined
- Feb 24, 2004
- Location
- TURKEY-ANKARA-INEGOL
- Thread Starter
- #4
thanks for your answers.also revision of my corsair is v1.2.this revision is good or bad??
- Joined
- Jul 24, 2002
- Location
- Lost in Thought
Less than ideal but you should be able to overclock it somewhat.
~THT
~THT
OP
- Joined
- Feb 24, 2004
- Location
- TURKEY-ANKARA-INEGOL
- Thread Starter
- #6
I reached 245 fsb.is it good for this ram ,Top Hat Theater?
- Joined
- Jul 24, 2002
- Location
- Lost in Thought
Yeah, can it go any higher? What vdimm are you using?
~THT
~THT
OP
- Joined
- Feb 24, 2004
- Location
- TURKEY-ANKARA-INEGOL
- Thread Starter
- #8
I am using vdimm2.8.but I haven't a good power supply.so I didn't increase the vdimm more
- Joined
- Jul 24, 2002
- Location
- Lost in Thought
That's really good considering it's only 2.8vdimm. IMO, 3.0v is the safe limit for 24/7 usage. Winbond BH5 chips will tolerate even more.
~THT
~THT
