PLZ Help me whit msi-6153 celeron 600

[khonhan]

I try to overclock my celeron 600 on msi-6153 motherboard .All i can get from this motherboard is 750 Mhz at 83/FSB.
When i set FSB to 100 it will change automatic to default.

Help!!

[AmbientFiction]

Have you changed the jumpers on the board?
I have an MSI 6309 the jumper set for the bus should be near the IDE cables but I don't know if your setting will be the same as mine

The jumper connect on the same row
This is auto on mine
I 0 0 I
I 0 0 I
133 Mhz
1 1 1 1
1 1 1 1
100 Mhz
1 1 1 1
0 0 0 0
66mhz
0 0 0 0
0 0 0 0
I = open
0 closed/jumped

I hope that helps some I don't know if it will work on your board though.

[The Doors]

Is it a Msi 6153Pro?
I ask you coz I've made an OC with this Mobo and a Celeron 466 upping Fsb to 75 (stable), 83 (sometimes freeze) and 100 (won't Boot) without this prob.
The only thing I did it, was take off the right jumper on the left side of Slotket.
Try also with a Bios upgrade.

[AmbientFiction]

I keep getting error messages from different programs about what my motherboard is I am getting so so I am opening it up and gonna see for sure..(The book dosen't list what it is)

[ebola]

khonhan (Jun 17, 2001 11:28 p.m.):
I try to overclock my celeron 600 on msi-6153 motherboard .All i can get from this motherboard is 750 Mhz at 83/FSB.
When i set FSB to 100 it will change automatic to default.

Help!!

i hope your not using a intel heatsink

and for "the doors" a celly 466 wont boot at 100 fsb because the core doesnt like to go over 600 mhz.

[The Doors]

Thanks ebola for your info :-)
I suppose won't boot @100, aren't Celeron2, even if temps are very low.