- Joined
- Jan 29, 2004
Alright, i know this board is notorious for problems between these two.
So, I just want to know if I have the problem or not. I set my voltage to the ram, which is 2x512 in dual channel, to 2.6 and restarted and checked pc health.
it showed a rather steady 2.6, maybe fluctuate between 2.6 and 2.605 and small flucuations. In this case the vtt was around 1.3, which is right.
Then I tried 2.7, and everything seemed to be going accordingly. The voltage did not fluctuate much from 2.7, and the vtt was reading 1.35.
2.8 stayed at 2.8 and vtt correctly read around 1.402 or close to that.
So then I tried 2.9, and 2.9 gave me a vtt of 1.34, and so did 3.0v and 3.1v, the vtt would not increase from 1.34 at 2.9-3.1
Does this mean I have the vtt problem? Is there any way to read these two parameters in windows to see if they fluctuate during usage?
So, I just want to know if I have the problem or not. I set my voltage to the ram, which is 2x512 in dual channel, to 2.6 and restarted and checked pc health.
it showed a rather steady 2.6, maybe fluctuate between 2.6 and 2.605 and small flucuations. In this case the vtt was around 1.3, which is right.
Then I tried 2.7, and everything seemed to be going accordingly. The voltage did not fluctuate much from 2.7, and the vtt was reading 1.35.
2.8 stayed at 2.8 and vtt correctly read around 1.402 or close to that.
So then I tried 2.9, and 2.9 gave me a vtt of 1.34, and so did 3.0v and 3.1v, the vtt would not increase from 1.34 at 2.9-3.1
Does this mean I have the vtt problem? Is there any way to read these two parameters in windows to see if they fluctuate during usage?
