HeLp Me OvErClOcKiNg

[Bond_]

I've got a intel p3 1Ghz 133Mhz FC-PGA on a ASUS CUSL2-C Mainboard and 320 OEM Ram 133Mhz
Can you guys help me to get 1.2Ghz ?
Give some tips ...
My cpu temp is around 25ºc at 1.90V, 154 Mhz FSB at this i'll get 1155Mhz, but i want 1200Mhz!!!
How can i disable sideband in registry??????
My problem is when a put FSB higher (more than 154Mhz) my pc WILL NOT POST!!!!
do i have to change some settings on the RAM???
What can i do?????
tks guys!!!

[Zuck Gou :)]

Well you can try setting the ram to cas3(thought the setting your at now will be faster than a few more mhz and cas3)..... if that doesnt work you can up the voltage to the ram, but I wouldn't recommend it.

If that doesnt work then your components are just maxed out.

[outhouse]

yep cas 3 will help bring stability instead of cas 2 also if you have settings like turbo mode, medium, normal, 10ns and 8ns then try for the lower settings like 8ns, also try www.rojakpot.com and look for there BIOS guide and make sure your settings are set for stability. Also i'm sure you have your memory set to minus clock speed but if not set it there. there are tips for disabling sideband in the tips section on front page look for video card performance, but it only works with VIA chipset. You may need better memory like Corsair, Mushkin and Crucial if you do get any get pc150, i guess if it does not work you could always take it back. Another thing you can try to disable DMA in windows, and as the guy above pointed out if you have VIO settings in BIOS you could raise that but i would not go over 3.6 volts because unlike CV VIO is not user friendly and if you go to high you can fry things fast, Well if this does not work theres a chance you have maxed out your CPU.

Also check to see if you have the latest BIOS for your MB but i would only flash to a newer version if you see something in the new version that will actualy help or applies to you.

just thought of this, what are you doing as far as northbridge cooling?, also making a small homemade HS for your clock generator may help too.

goodluck