BE6-II and PIII/800EB ... max. (stable!) O/C setting [Archive]

View Full Version : BE6-II and PIII/800EB ... max. (stable!) O/C setting

bithevn

06-27-01, 11:25 PM

I will be getting a PIII/800EB tomorrow. I have a ThermalTake GoldenOrb cooler on it right now (with a Cel 566/o'cd to 850!). What are the most stable o/c setting with this CPU/mobo (I have the XU version of the BIOS) combo (bus/multiplier/voltage) with my GoldenOrb and thermal paste?

Greg

Endeavor

06-28-01, 12:26 AM

every processor is different
might want to check the CPU Database on the front page for more detials

[OC]_SR20DE

06-28-01, 03:19 AM

Since your BX mobo is going to be a limiting factor on the AGP/PCI bus speed, you should at least be able to make the system stable at 150mhz FSB or/and Up. With an i815E mobo, you might be able to go higher :)

6 x 150mhz / 1.70 Vcore or more as needed/ AGP :2/3 & PCI : 1/4

good luck!