1 More NOOB question..

Here is my case and I am wanting to set it up using all 3 sections for individual need's.
http://img29.photobucket.com/albums/v87/diehrd/P3020846.jpg

This rear shot should let ya see there are 3 sections 1 for main board and {2}14 bay drive areas.
http://img29.photobucket.com/albums/v87/diehrd/P2280822.jpg

Ok Question ?

I want to set the radiator at the far left of the case when looking at the rear pic. And have the main board go on the right leaving the center for drive bay's.

Will the length of the cooling lines create any problems for me ? I will have no 90 degree fittings or, y and t fittings in the system. the distance from heater core to the Water blocks will be approx 10 inches to 12 inches on the preasure side and on the return side. Oh the Pump will be the MCP600..Thanks

avoid 90° fittings at all costs and it will be fine just get a good pump with alot of head

It'll be fine. running parrallel doesn't hurt flow nearly as much as vertical or turns.

That's a sweet case...