Jumper setting for a P3BF

[wpabon1]

I have the new bios ver 1006. And it's say you can use an Intel Pen III 850. Now I've heard people can get it to work. Then over clock it. But I need the jumpersettings for it to read an Intel Pen III 850. And also if once I get it to work. Can anyone tell me where I can get a great cooling system for the Intel? To of course keep it cool while being over clocked. Thank you for your time!

[outhouse]

You should not have to change jumper settings except to raise frontsidebus [FSB] and corevoltage [CV] to match your new 850's default settings, do not worry about the multiplier as it cannot be changed and the 850's multiplier will run what ever its default is no matter what BIOS says the multiplier is. If there are other jumpers you need to change your going to have to read your MB manual if you dont have it see if you can download it at your MB's website.

goodluck

OH as far as good cooling you can start with a couple of case fans and then make sure you get a good HSF heatsinkfan theres a good all copper one called the Gladiator and its only 19.99 plus shipping you can get a link to the web site that sells this just post in the cooling section or look in syber [spelled wrong] deals on the front page. now before you start overclocking away i highly recommend that you read through the tips section and get yourself a good background your pc will thank you later.

[Zuck Gou :)]

Turn all the dipswitches to off. The bios should set everything up for you