p3v133 with PIII 600 EB

[poor guy]

I couldn´t overclock my cpu yet!!! I´ve put the multiplier up (5.5 at 133) and it keeps on 4.5..... what can i do?
Other, my mainboard don´t detect the cpu temperature...

Can anybody help-me???

[It_The_Cow]

You can't change the multiplier no matter what. Your only bet would be to download CPUFSB or SoftFSB from tweakfiles.com. If you run into stability problems, increase the voltage some if your BIOS permits

[poor guy]

why i cant change the multiplier? an what about the cpu temp?

[It_The_Cow]

Intel locks their multipliers at the time of manufacturing, and there is no known way to unlock them, yet. As for your temperatures, you may try MBM 5 from Tweakfiles.com. Since your motherboard can't ddetect temperatures, you may not have any enviromental sensors for MBM to work with. It's always worth a try, though

[poor guy]

so, the only way is to get the bus higher? and the manual of the board says that it has a temperature monitiring for the cpu.

[It_The_Cow]

Yep. Slowly increase the bus speed until your system becomes unstable. Try running a few strenuous applications to test it. And since your motherboard does have an enviromental monitor, MBM should work just fine

[samuknow]

Welcome to the forum....

Check out the front page. There are plenty of articles that can help you out. Try to get as much info about you board and CPU as you can before you begin.
Good luck and welcome to the wonderful world of overclocking.....