Need help getting the most out of a 2500+

Donnald · Mar 8, 2004

As you can see below I am learning how to overclock but I am far from knowing what I am doing. Can anyone give me some detailed tips to squeeze the most speed out of this CPU.

On the Motherboard monitor the Temp is at 28 degrees(sensor 1) and 34degrees(sensor 3) and around 3-4 degrees hotter when I run Aquamark over and over.

I will also be getting a new Radeon Card soon so no need to mess with that.

dead_man311 · Mar 8, 2004

temps look good, try uping your FSB alil more and maybe add some Vcore to it, then see how much further you can push your FSB

Welcome To The Forum

Donnald · Mar 8, 2004

How do I up the Vcore? what menu in the bios is it under?

The FSB setting is stable to 197-198MHz. I have it to 197 MHz ATM.

dead_man311 · Mar 8, 2004

there will be a option in your bios

and one thing hers a link for You to help fix your sig

Donnald · Mar 8, 2004

Thanks for the tips!!

Whats a safe Vcore to try?

dead_man311 · Mar 8, 2004

up it a lil at first and watch your temps and then up your FSB alil and see how it runs how stable it is

no problem with the tip's now you can go throw and add color too it

Donnald · Mar 8, 2004

I went to 1.668 volts and restarted, the screen was all messed up so voltage is not gonna work on the CPU. I will try the voltage on the RAM.

Need help getting the most out of a 2500+

Donnald

Registered

dead_man311

Member

Donnald

Registered

dead_man311

Member

Donnald

Registered

dead_man311

Member

Donnald

Registered

Similar threads